Next: About this document ...
Up: archi_robot
Previous: Treillis articulés/Truss
La page de J-P. Merlet
J-P. Merlet home page
La page Présentation de COPRIN
COPRIN home page
La page "Présentation" de l'INRIA
INRIA home page
- 1
-
Agrawal S.K., Desmier G., et Li S.
Fabrication and analysis of a novel 3 dof parallel wrist mechanism.
ASME J. of Mechanical Design, 117(2):343-345,
Juin 1995
- 2
-
Ahn C. et al.
High-tilt parallel positioning mechanism development and cutter path
simulation for laser micro-machining.
Computer-aided design, 39(3):218-228, Mars 2007
- 3
-
Alizade R.I. et Bayram C.
Structural synthesis of parallel manipulators.
Mechanism and Machine Theory, 39(8):857-870,
Août 2004
- 4
-
Alizade R.I. et Tagiyev N.R.
A forward and reverse displacement analysis of a 6-dof in-parallel
manipulator.
Mechanism and Machine Theory, 29(1):115-124,
Janvier 1994
- 5
-
Ancunta A., Company O., et Pierrot F.
Modeling and optimization of Quadriglide, a Schönflies motion
generator module for 5-axis milling machine-tools.
In IEEE Int. Conf. on Robotics and Automation, pages
2174-2179, Kobe, 14-16 Mai 2009
- 6
-
Arata J. et al.
Development of a haptic device DELTA-4 using parallel link
mechanism.
In IEEE Int. Conf. on Robotics and Automation, pages 294-300,
Kobe, 14-16 Mai 2009
- 7
-
Artigue F., Amirat M.Y., et Pontnau J.
Isoelastic behavior of parallel robots.
Robotica, 7(4):323-325, 1989.
- 8
-
Arun V. et al.
Determination of the workspace of the 3-dof double-octahedral
variable-geometry-truss manipulator.
In 22nd Biennial Mechanisms Conf., pages 493-500, Scottsdale,
13-16 Septembre 1992
- 9
-
Austad A.
Arm device, 4 Juin 1987
IPN WO 87,03239.
- 10
-
Bai S. et Hansen M.R.
Modelling of a spherical robotic wrist with euler parameters.
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 11
-
Bamberger H. et Shoham M.
A new configuration of a six degrees-of-freedom parallel robot for
mems fabrication.
In IEEE Int. Conf. on Robotics and Automation, pages
4545-4550, New Orleans, 28-30 Avril 2004
- 12
-
Behi F.
Kinematic analysis for a six-degree-of-freedom 3-PRPS parallel
mechanism.
IEEE J. of Robotics and Automation, 4(5):561-565,
Octobre 1988
- 13
-
Behzadipour S. et Khajepour A.
Design of reduced dof parallel cable-based robots.
Mechanism and Machine Theory, 39(10):1051-1065,
Octobre 2004
- 14
-
Beji L.
Modélisation, identification et commande d'un robot
parallèle.
Thèse de doctorat, Université Evry Val d'Essonne, Evry, 1997.
- 15
-
Bonev I. et Gosselin C.M.
Geometric algorithms for the computation of the constant-orientation
workspace and singularity surfaces of a special 6-RUS parallel manipulator.
In ASME Design Engineering Technical Conference, Montréal,
29 Septembre-2 Octobre, 2002
- 16
-
Briot S. et Bonev I.A.
Pantotepron:a new fully decoupled 3-dof translational parallel robot
for pick-and-place applications.
J. of Mechanisms and Robotics, 1(2):021001-1/9,
Mai 2009
- 17
-
Brodsky V., Glozman D., et Shoham M.
Double circular-triangular six-degree-of-freedom parallel robot.
In ARK, pages 155-164, Strobl,
29 Juin-4 Juillet, 1998
- 18
-
Brogardh T., Hanssen S., et Hovland G.
Application-oriented development of parallel kinematic manipulators
with large workspace.
In 2nd Int. Colloquium, Collaborative Research Centre 562,
pages 153-170, Braunschweig, 10-11 Mai 2005
- 19
-
Bruyninckx H.
The 321-hexa: a fully parallel manipulator with closed-form position
and velocity kinematics.
In IEEE Int. Conf. on Robotics and Automation, pages
2657-2662, Albuquerque, 21-28 Avril 1997
- 20
-
Byun Y.K. et Cho H-S.
Analysis of a novel 6-dof,3-PPSP parallel manipulator.
Int. J. of Robotics Research, 16(6):859-872,
Décembre 1997
- 21
-
Callegari M. et Marzetti P.
Kinematics of a family of parallel translating mechanisms.
In RAAD, Cassino, 7-10 Mai 2003
- 22
-
Callegari M., Palpacelli M., et Scarponi M.
Kinematics of the 3-CPU parallel manipulator assembled for motions
of pure translation.
In IEEE Int. Conf. on Robotics and Automation, pages
4031-4036, Barcelona, 19-22 Avril 2005
- 23
-
Carricato M. et Parenti-Castelli V.
A family of 3-DOF translational parallel manipulators.
ASME J. of Mechanical Design, 125(2):302-307,
Juin 2003
- 24
-
Ceccarelli M.
A new 3 d.o.f. spatial parallel mechanism.
Mechanism and Machine Theory, 32(8):896-902, 1997.
- 25
-
Chen W-J. et al.
A novel 4-dof parallel manipulator and its kinematic modelling.
In IEEE Int. Conf. on Robotics and Automation, pages
3350-3355, Seoul, 23-25 Mai 2001
- 26
-
Chen W-J. et al.
A 2T-2R, 4-dof parallel manipulator.
In ASME Design Engineering Technical Conference, Montréal,
29 Septembre-2 Octobre, 2002
- 27
-
Cheng H.H.
Real-time manipulation of a hybrid serial-and-parallel driven
redundant industrial manipulator.
ASME J. of Dynamic Systems, Measurement and Control,
116(4):687-701, Décembre 1994
- 28
-
Chung J-H., Yi B-J., et Oh S.
Design of a new spatial 3-dof parallel mechanism with application to
a PDP TV mounting device.
In IEEE Int. Conf. on Intelligent Robots and Systems (IROS),
pages 3999-4006, San Diego, 22-26 Septembre 2007
- 29
-
Clavel R. et al.
A new parallel kinematics able to machine 5 sides of a cube-shaped
object: Hita STT.
In 1st Int. Colloquium, Collaborative Research Centre 562,
pages 107-118, Braunschweig, 29-30 Mai 2002
- 30
-
Clavel R.
DELTA, a fast robot with parallel geometry.
In 18th Int. Symp. on Industrial Robots (ISIR), pages 91-100,
Lausanne, 26-28 Avril 1988
- 31
-
Cleary K. et Brooks T.
Kinematic analysis of a novel 6-dof parallel manipulator.
In IEEE Int. Conf. on Robotics and Automation, pages 708-713,
Atlanta, 2-6 Mai 1993
- 32
-
Daniali H.R.M., Zsombor-Murray P.J., et Angeles J.
The kinematics of a 3 d.o.f. planar and spherical double-triangular
parallel manipulators.
In J. Angeles P. Kovacs, G. Hommel, editor, Computational
Kinematics, pages 153-164. Kluwer, 1993.
- 33
-
Di Gregorio R.
A new parallel wrist using only revolute pairs: the 3-RUU wrist.
Robotica, 19(3):305-309, Mai 2001
- 34
-
Di Gregorio R.
A new family of spherical parallel manipulators.
Robotica, 20(4):353-358, Juillet 2002
- 35
-
Di Gregorio R.
Kinematics of the 3-RSR wrist.
IEEE Trans. on Robotics, 20(4):750-754,
Août 2004
- 36
-
Di Gregorio R. et Parenti-Castelli V.
A translationnal 3-dof parallel manipulator.
In ARK, pages 49-58, Strobl,
29 Juin-4 Juillet, 1998
- 37
-
Dunlop G.R. et Jones T.P.
Position analysis of a 3-dof parallel manipulator.
Mechanism and Machine Theory, 32(8):903-920,
Novembre 1997
- 38
-
Dunlop G.R. et Jones T.P.
Position analysis of a two DOF parallel mechanism- the Canterbury
tracker.
Mechanism and Machine Theory, 34(4):599-614,
Mai 1999
- 39
-
Ebert-Uphoff I. et Gosselin C.M.
Kinematic study of a new type of spatial parallel platform mechanism.
In ASME Design Engineering Technical Conferences, Atlanta,
13-16 Septembre 1998
- 40
-
El-Khasawneh B. et Ferreira P.M.
The Tetrahedral tripod.
In First European-American Forum on Parallel Kinematic
Machines, pages 419-430, Milan,
31 Août-1 Septembre, 1998
- 41
-
Erdman A.G.
Modern Kinematics.
Wiley, New-York, 1993.
- 42
-
Fanghella P., Galletti C., et Giannetti E.
Parallel robots that change their group of motion.
In ARK, pages 49-56, Ljubljana,
26-29 Juin 2006
- 43
-
Fang Y. et Tsai L-W.
Structure synthesis of a class of 3-DOF rotational parallel
manipulators.
IEEE Trans. on Robotics and Automation, 20(1):117-121,
Février 2004
- 44
-
Faulring E.L., Colgate J.E., et Peshkin M.A.
A high performance 6-dof haptic Cobot.
In IEEE Int. Conf. on Robotics and Automation, pages
1980-1985, New Orleans, 28-30 Avril 2004
- 45
-
Frisoli A. et al.
Synthesis by screw algebra of translating in-parallel actuated
mechanisms.
In ARK, Piran, 25-29 Juin 2000
- 46
-
Gallardo-Alvarado J., Rico-Martínez J.M., et Alici G.
Kinematics and singularity analyses of a 4-dof parallel manipulator
using screw theory.
Mechanism and Machine Theory, 41(9):1048-1061,
Septembre 2006
- 47
-
Gallardo J., Orozco-Mendoza H., et Rico-Martinez J.M.
A novel five-degrees of freedom decoupled robot.
Robotica, 28(6):909-917, Juin 2010
- 48
-
Gan D.M., Dai J.S., et Caldwelll D.G.
Design and kinematics analysis of a 3CCC parallel mechanism.
Robotica, 28(7):1065-1072, Décembre 2010
- 49
-
Gao F. et al.
New kinematic structures for 2-,3-,4- and 5-dof parallel manipulator
designs.
Mechanism and Machine Theory, 37(11):1395-1411,
Novembre 2002
- 50
-
Glazunov V.A. et al.
On new class of parallel-cross mechanisms.
In Computational Kinematics, pages 93-100, Duisburg,
6-8 Mai 2009
- 51
-
Glazunov V.A., Laryushkin P., et Kheylo S.
3-dof translational and rotational parallel manipulators.
In 4h European Conf. on Mechanism Science (Eucomes), pages
199-207, Santander, 19-21 Septembre 2012
- 52
-
Gogu G.
Fully-isotropic three-degree-of-freedom parallel wrists.
In IEEE Int. Conf. on Robotics and Automation, pages 895-900,
Roma, 10-14 Avril 2007
- 53
-
Gosselin C.M. et al.
Parallel mechanisms of the Multipteron family: kinematic
architectures and benchmarking.
In IEEE Int. Conf. on Robotics and Automation, pages 555-560,
Roma, 10-14 Avril 2007
- 54
-
Gosselin C. et Angeles J.
The optimum kinematic design of a planar three-degree-of-freedom
parallel manipulator.
J. of Mechanisms, Transmissions and Automation in Design,
110(1):35-41, Mars 1988
- 55
-
Gosselin C.
Kinematic analysis optimization and programming of parallel
robotic manipulators.
Thèse de doctorat, McGill University, Montréal,
15 Juin 1988
- 56
-
Gosselin C.
Kinematische und statische analysis eines ebenen parallelen
manipulators mit dem freiheitgrad zwei.
Mechanism and Machine Theory, 31(2):149-160,
Février 1996
- 57
-
Gosselin C., Lemieux S., et Merlet J-P.
A new architecture of planar three-degree-of-freedom parallel
manipulator.
In IEEE Int. Conf. on Robotics and Automation, pages
3738-3743, Minneapolis, 24-26 Avril 1996
- 58
-
Goudali A., Lallemand J-P., et Zeghloul S.
Espace de travail de la nouvelle structure 2-Delta.
Revue d'Automatique et de Productique Appliquée,
8(2-3):205-210, 1995.
- 59
-
Griffis M., Crane C., et Duffy J.
A smart kinestatic interactive platform.
In ARK, pages 459-464, Ljubljana,
4-6 Juillet 1994
- 60
-
Grunewald P.
Car body painting with the spine spray system.
In 14th Int. Symp. on Industrial Robots (ISIR), pages 633-641,
Gothenburg, 1984.
- 61
-
Han C-S, Tesar D., et Traver A.
The optimum design of a 6 dof fully parallel micromanipulator for
enhanced robot accuracy.
In ASME Design Automation Conf., pages 357-363, Montréal,
17-20 Septembre 1989
- 62
-
Hayes M.J.D. et Zsombor-Murray P.J.
Kinematic mapping of 3-legged planar platform with holonomic higher
pair.
In ARK, pages 421-430, Portoroz-Bernadin,
22-26 Juin 1996
- 63
-
Hayward V. et Kurtz R.
Preliminary study of serial-parallel redundant manipulator.
In NASA Conference on Space Telerobotics, pages 39-48,
Pasadena, 31 Janvier 1989
- 64
-
Hervé J.M. et Karouia M.
The novel 3-RUU wrist with no idle pair.
In Workshop on Fundamental Issues and Future Research Directions
for Parallel Mechanisms and Manipulators, Québec,
3-4 Octobre 2002
- 65
-
Hervé J.M.
Group mathematics and parallel link mechanisms.
In IMACS/SICE Int. Symp. on Robotics, Mechatronics, and
Manufacturing Systems, pages 459-464, Kobe,
16-20 Septembre 1992
- 66
-
Hervé J.M.
Group mathematics and parallel link mechanisms.
In 9th IFToMM World Congress on the Theory of Machines and
Mechanisms, pages 2079-2082, Milan,
30 Août-2 Septembre, 1995
- 67
-
Hess-Coelho T.A.
A redundant parallel spherical mechanism for robotic wrist
applications.
ASME J. of Mechanical Design, 129(8):891-895,
Août 2007
- 68
-
Hess-Coelho T.A. et Malvezzi F.
Workspace optimization of 3 RSS+CP parallel mechanisms.
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 69
-
Hesselbach J. et al.
Platform for machine tool consists of two parallel platforms linked
by five articulated levers providing five degrees of freedom for machine tool
spindle, 23 Mars 2000
German Patent DE19840886.
- 70
-
Hesselbach J., Plitea N., Frindt M., et Kusiek A.
A new parallel mechanism to use for cutting convex glass panels.
In ARK, pages 165-174, Strobl,
29 Juin-4 Juillet, 1998
- 71
-
Hesselbach J. et al.
Manipulator for parallel structure and driving guide element,
17 Septembre 1998
German Patent DE19710171.
- 72
-
Hu M. et al.
The 3-dof in-parallel robot and its application for billet snagging.
In IFAC World Congress, Beijing, 1999.
- 73
-
Hui R. et al.
Mechanisms for haptic feedback.
In IEEE Int. Conf. on Robotics and Automation, pages
2138-2143, Nagoya, 25-27 Mai 1995
- 74
-
Hunt K.H.
Geometry of robotics devices.
Mechanical Engineering Transactions, 7(4):213-220, 1982.
- 75
-
Hunt K.H.
Structural kinematics of in parallel actuated robot arms.
J. of Mechanisms, Transmissions and Automation in Design,
105(4):705-712, Mars 1983
- 76
-
Innocenti C. et Parenti-Castelli V.
Direct kinematics of the 6-4 fully parallel manipulator with position
and orientation uncoupled.
In European Robotics and Intelligent Systems Conf., Corfou,
23-28 Juin 1991
- 77
-
Janabi-Sharifi F. et Shckokin B.
A rotary parallel manipulator: modeling and workspace analysis.
In IEEE Int. Conf. on Robotics and Automation, pages
3671-3677, New Orleans, 28-30 Avril 2004
- 78
-
Jin Y., Chen I-M., et Yang G.
Structure synthesis and singularity analysis of a parallel
manipulator based on selective actuation.
In IEEE Int. Conf. on Robotics and Automation, pages
4533-4538, New Orleans, 28-30 Avril 2004
- 79
-
Kanaan D., Wenger P., et Chablat D.
Kinematics analysis of the parallel module of the VERNE machine.
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 80
-
Karouia M. et Hervè J.M.
A three-dof tripod for generating spherical motion.
In ARK, pages 395-402, Piran, 25-29 Juin 2000
- 81
-
Karouia M. et Hervè J.M.
Non-overconstrained 3-dof spherical parallel manipulators of type
3-RCC, 3-CRR, 3-CRC.
Robotica, 24(1):85-94, Janvier 2006
- 82
-
Kawamura S. et al.
Development of an ultrahigh speed robot FALCON using wire drive
system.
In IEEE Int. Conf. on Robotics and Automation, pages 215-220,
Nagoya, 25-27 Mai 1995
- 83
-
Kim S.M., Kim W., et Yi B-J.
Kinematic analysis and optimal design of a 3T1R type parallel
mechanism.
In IEEE Int. Conf. on Robotics and Automation, pages
2199-2204, Kobe, 14-16 Mai 2009
- 84
-
Kim D. et W.K. Chung.
Kinematic condition analysis of three-dof pure translational parallel
manipulators.
ASME J. of Mechanical Design, 125(2):323-331,
Juin 2003
- 85
-
Kim H.S. et Tsai L-W.
Design optimization of Cartesian parallel manipulator.
ASME J. of Mechanical Design, 125(1):43-51,
Mars 2003
- 86
-
Kim J. et al.
Eclipse-II: a new parallel mechanism enabling continuous 360-degree
spinning plus three-axis translational motions.
In IEEE Int. Conf. on Robotics and Automation, pages
3274-3279, Seoul, 23-25 Mai 2001
- 87
-
Klinkhamer F.
An adjustment for five degrees of freedom as an alternative for a
hexapod mechanism.
In SPIE Optomechanics 2003, San-Diego,
3-8 Août 2003
- 88
-
Koevermans W.P. et al.
Design and performance of the four d.o.f. motion system of the NLR
research flight simulator.
In AGARD Conf. Proc. No 198, Flight Simulation, pages
17-1/17-11, La Haye, 20-23 Octobre 1975
- 89
-
Kohli D., Lee S-H, Tsai K-Y, et Sandor G.N.
Manipulator configurations based on Rotary-Linear (R-L)
actuators and their direct and inverse kinematics.
J. of Mechanisms, Transmissions and Automation in Design,
110(4):397-404, Décembre 1988
- 90
-
Kokkinis T. et Millies P.
A parallel robot-arm regional structure with actuational redundancy.
Mechanism and Machine Theory, 26(6):629-641, 1991.
- 91
-
Kong X. et Gosselin C.M.
Kinematics and singularity analysis of a novel type of
3-RR 3-dof translational parallel manipulator.
Int. J. of Robotics Research, 21(9):791-798,
Septembre 2002
- 92
-
Kong X. et Gosselin C.M.
Type synthesis of 3T1R 4-dof parallel manipulators based on screw
theory.
IEEE Trans. on Robotics and Automation, 20(2):181-190,
Avril 2004
- 93
-
Kong X., Gosselin C.M., et Richard P.L.
Type synthesis of parallel mechanisms with multiple operation modes.
ASME J. of Mechanical Design, 129(7):595-601,
Juin 2007
- 94
-
Krut S. et al.
I4: a new parallel mechanism for Scara motions.
In IEEE Int. Conf. on Robotics and Automation, pages
1875-1880, Taipei, 14-19 Septembre 2003
- 95
-
Krut S. et al.
A high-speed parallel robot for Scara motion.
In IEEE Int. Conf. on Robotics and Automation, pages
4109-4115, New Orleans, 28-30 Avril 2004
- 96
-
Lambert M.
Polyarticulated retractile mechanism, 24 Mars 1987
United States Patent 4,651,589, Société Becart
S.A.
- 97
-
Lande M.A. et David R.J.P.
Articulation for manipulator arm, 17 Novembre 1981
United States Patent 4,300,362, Association des
Ouvriers en Instruments de Précision, Paris.
- 98
-
Landsberger S.E. et Sheridan T.B.
A new design for parallel link manipulator.
In Proc. Systems, Man and Cybernetics Conf., pages 812-814,
Tucson, 1985.
- 99
-
Laribi M.A., Romdhane L., et Zeghloul S.
Synthesis of RAF parallel robot for prescribed workspace.
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 100
-
Laryushkin P. et Glazunov V.
A new 3-dof translational parallel manipulator: Kinematics, dynamics
and workspace analysis.
In Romansy, Paris, 12-15 Juin 2012
- 101
-
Lee C-C. et Hervè J.M.
Translational parallel manipulators with doubly planar limbs.
Mechanism and Machine Theory, 41(4):433-455,
Avril 2006
- 102
-
Lee K-M. et Shah D.K.
Kinematic analysis of a three-degrees-of-freedom in-parallel actuated
manipulator.
IEEE J. of Robotics and Automation, 4(3):354-360,
Juin 1988
- 103
-
Li Q. et Huang Z.
Mobility analysis of a 3-5R parallel mechanism family.
In IEEE Int. Conf. on Robotics and Automation, pages
1887-1892, Taipei, 14-19 Septembre 2003
- 104
-
Li Q. et Huang Z.
Mobility analysis of lower-mobility parallel manipulators based on
screw theory.
In IEEE Int. Conf. on Robotics and Automation, pages
1179-1184, Taipei, 14-19 Septembre 2003
- 105
-
Li W., Gao F., et Zhang J.
R-cube, a decoupled parallel manipulator only with revolute joints.
Mechanism and Machine Theory, 40(4):467-473,
Avril 2005
- 106
-
Li W., Gao F., et Zhang J.
A three-dof translational manipulator with decoupled geometry.
Robotica, 23(6):805-808, Novembre 2005
- 107
-
Li Y. et Xu Q.
Kinematic analyis and design of a new 3-dof translational parallel
manipulator.
ASME J. of Mechanical Design, 128(4):729-737,
Juillet 2006
- 108
-
Ling S.H.
Motion/force simulator with six or three degrees of freedom,
19 Mai 1998
United States Patent 5,752,834.
- 109
-
Liu X-J. et Wang J.
Some new parallel mechanisms containing the planar four-bar
parallelogram.
Int. J. of Robotics Research, 22(9):717-732,
Septembre 2003
- 110
-
Liu X-J., Kim J., et Oh K-K.
Singularity analysis of the HALF parallel manipulator with revolute
actuators.
In IEEE Int. Conf. on Robotics and Automation, pages 767-772,
Taipei, 14-19 Septembre 2003
- 111
-
Liu X-J., Wang J., et Kim J.
Determination of the link lengths for a spatial 3-dof parallel
manipulator.
ASME J. of Mechanical Design, 128(2):365-373,
Mars 2006
- 112
-
Lu Y. et Hu B.
Analysing kinematics and solving active/constrained forces of a
3SPU+UPR parallel manipulator.
Mechanism and Machine Theory, 42(10):1298-1313,
Octobre 2007
- 113
-
Lu Y. et al.
Synthesis and analysis of kinematics/statics of a novel
parallel manipulator.
ASME J. of Mechanical Design, 130(9):092302-1/8,
Septembre 2008
- 114
-
Lu Y. et al.
Kinematics/statics of a 4-dof over-constrained parallel manipulator
with 3 legs.
Mechanism and Machine Theory, 44(8):1497-1506,
Août 2009
- 115
-
Lückel J. et al.
Iterative model-based design of the parallel robot, TriPlanar.
In IEEE/ASME Int. Conf. on Advanced Intelligent Mechatronics,
pages 135-140, Como, 8-12 Juillet 2001
- 116
-
McCallion H. et Pham D.T.
The analysis of a six degrees of freedom work station for mechanized
assembly.
In 5th IFToMM World Congress on the Theory of Machines and
Mechanisms, pages 611-616, Montréal, Juillet 1979
- 117
-
Maier T. et Woernle C.
Inverse kinematics for an underconstrained cable suspension
manipulator.
In ARK, pages 97-104, Strobl,
29 Juin-4 Juillet, 1998
- 118
-
Martin Y.S. et al.
VERNE, a new 5-axes hybrid architecture machining center.
In 5th Chemnitzer Parallelkinematik Seminar, pages 657-676,
Chemnitz, 25-26 Avril 2006
- 119
-
Mbarek T., Nefzi M., et Corves B.
Kinematic analysis and workspace determination of a parallel
manipulator with five degree of freedom.
In Computational Kinematics, Cassino,
4-6 Mai 2005
- 120
-
McCloy D.
Some comparisons of serial-driven and parallel driven manipulators.
Robotica, 8(4):355-362, 1990.
- 121
-
Merkle R.C.
A new family of six degree of freedom positional devices.
http://nano.xerox.com/nanotech/6dof.html, 1994.
- 122
-
Merlet J-P. et Gosselin C.
Nouvelle architecture pour un manipulateur parallèle à 6 degrés
de liberté.
Mechanism and Machine Theory, 26(1):77-90, 1991.
- 123
-
Merlet J-P.
Direct kinematics of planar parallel manipulators.
In IEEE Int. Conf. on Robotics and Automation, pages
3744-3749, Minneapolis, 24-26 Avril 1996
- 124
-
Mianowski K.
Singularity analysis of parallel manipulator POLMAN 3x2 with six
degrees of freedom.
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 125
-
Mianowski K. et Nazarczuk K.
Parallel drive of manipulator arm.
In 8th RoManSy, pages 140-147, Cracovie,
2-6 Juillet 1990
- 126
-
Mianowski K.
Dextrous fully parallel manipulator with six degrees of freedom.
In 12th RoManSy, pages 253-260, Paris,
6-9 Juillet 1998
- 127
-
Mitova T. et Vatkitchev A.
Analysis of a closed space mechanism with three degree of mobility.
In XI COBEM, Rio de Janeiro, 1991.
- 128
-
Nagai K. et al.
Development of parallel manipulator "ninja" with
ultra-high-acceleration.
In IEEE Int. Conf. on Robotics and Automation, pages
3678-3685, Taipei, 14-19 Septembre 2003
- 129
-
Nastase A.
The class of hybrid parallel mechanisms 3(JRS).
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 130
-
Neumann K.E.
Robot, 22 Mars 1988
United States Patent 4,732,525, Neos Product HB
Norrtalje Suède.
- 131
-
Olea G., Plitea N., et Takamusa K.
Kinematical analysis and simulation of a new parallel mechanism for
robotics application.
In ARK, pages 403-410, Piran, 25-29 Juin 2000
- 132
-
Ouerfelli M. et Kumar V.
Optimization of a spherical five bar parallel drive linkage.
In ASME Design Automation Conf., Miami,
22-25 Septembre 1991
- 133
-
Parushev P. et Chakarov D.
Structural investigation of manipulators with linear drivers.
In 8th RoManSy, pages 148-155, Cracovie,
2-6 Juillet 1990
- 134
-
Patarinski S.P. et Uchiyama M.
Position/orientation decoupled parallel manipulator.
In ICAR, pages 153-158, Tokyo,
1-2 Novembre 1993
- 135
-
Piccin O. et al.
Kinematic modeling of a 5-dof parallel mechanism for semi-spherical
workspace.
Mechanism and Machine Theory, 44(8):1485-1496,
Août 2009
- 136
-
Pierrot F.
Parallel mechanisms and redundancy.
In 1st Int. Colloquium, Collaborative Research Centre 562,
pages 261-277, Braunschweig, 29-30 Mai 2002
- 137
-
Pierrot F. et al.
Lower mobility PKM for large tilting angles.
In 2nd Int. Colloquium, Collaborative Research Centre 562,
pages 253-268, Braunschweig, 10-11 Mai 2005
- 138
-
Pierrot F. et al.
Four-dof PKM with articulated traveling plate.
In 5th Chemnitzer Parallelkinematik Seminar, pages 677-693,
Chemnitz, 25-26 Avril 2006
- 139
-
Pierrot F., Dauchez P., et Fournier A.
Towards a fully-parallel 6 d.o.f. robot for high speed applications.
In IEEE Int. Conf. on Robotics and Automation, pages
1288-1293, Sacramento, 11-14 Avril 1991
- 140
-
Poduraev J., Ihlenfeldt S., et Loginov A.
Development of a control approach for PKMs with scissor kinematics.
In 5th Chemnitzer Parallelkinematik Seminar, pages 175-192,
Chemnitz, 25-26 Avril 2006
- 141
-
Pollard W.L.V.
Position controlling apparatus, 16 Juin 1942
United States Patent 2,286,571.
- 142
-
Pritschow G., Eppler C., et Lehner W-D.
Highly dynamic drives for parallel kinematic machines with constant
arm length.
In 1st Int. Colloquium, Collaborative Research Centre 562,
pages 199-211, Braunschweig, 29-30 Mai 2002
- 143
-
Rebman J.
Object manipulator, 23 Août 1988
United States Patent 4,765,795 Lord Corporation,
Eric, Pa.
- 144
-
Reboulet C.
Les nouvelles architectures de robots: performances et perspectives
liées aux robots parallèles.
In 8ieme journées Robotique et Productique du CETIM, St
Etienne, 1990.
- 145
-
Reboulet C. et al.
Rapport d'avancement projet VAP, thème 7, phase 3.
Rapport de Recherche 7743, CNES/DERA, Janvier 1991
- 146
-
Reboulet C., Lambert C., et Nombrail N.
A parallel redundant manipulator: SPEED-R-MAN and its control.
In ISRAM, pages 285-291, Santa-Fe,
11-13 Novembre 1992
- 147
-
Reboulet C.
Parallel-structure manipulator device for displacing and orienting an
object in a cylindrical workspace, 23 Juillet 1996
United States Patent 5,539,291 ONERA.
- 148
-
S. Refaat et al.
Two-mode overconstrained three-dofs rotational-translational
linear-mode-based parallel-kinematics mechanism for machine tool
applications.
Robotica, 25(4):461-466, Juillet 2007
- 149
-
Reinholtz C.F. et Gokhale D.
Design and analysis of variable geometry truss robots.
In 9th Annual Conf. on Applied Mechanisms, pages 1-5, Oklahoma
State University, 1987.
- 150
-
Richard P.L., Gosselin C.M., et Kong X.
Kinematic analysis and prototyping of a partially decoupled 4-dof
3TR1 parallel manipulator.
ASME J. of Mechanical Design, 129(7):611-616,
Juin 2007
- 151
-
Rolland L.H.
The Manta and the Kanuk novel 4-dof parallel mechanisms for
industrial handling.
In ASME Int. Mech. Eng. Congress, Nashville,
14-19 Novembre 1999
- 152
-
Romdhane L., Affi Z., et Fayet M.
Design and singularity analysis of a 3-translational-dof in-parallel
manipulator.
ASME J. of Mechanical Design, 124(3):419-426,
Septembre 2002
- 153
-
Romiti A. et Sorli M.
Flexible sensorized micro-assembly by a small parallel manipulator.
In Int. FAMOS Seminar, pages 181-189, Besançon,
18-19 Septembre 1990
- 154
-
Ryu D. et al.
Design of a 6 DOF haptic master for teleoperation of a mobile
manipulator.
In IEEE Int. Conf. on Robotics and Automation, pages
3243-3248, Taipei, 14-19 Septembre 2003
- 155
-
Ryu R.J. et al.
Eclipse: an overactuated parallel mechanism for rapid machining.
In 12th RoManSy, pages 79-86, Paris,
6-9 Juillet 1998
- 156
-
Salgado O. et al.
A parallelogram-based parallel manipulator for Schönflies motion.
ASME J. of Mechanical Design, 129(12):1243-1250,
Décembre 2007
- 157
-
Sarkissyan Y.L. et Parikyan T.F.
Manipulator, 1990.
Russian Patent 1585144.
- 158
-
Seguchi Y., Tanaka M., et al.
Criteria-oriented configuration control of adaptive structure and its
modular neural network representation.
In First Joint USA/Japan Conf. on adaptive structure, pages
402-421, Maui, Hawaii, 13-15 Novembre 1990
- 159
-
Shahinpoor M.
Kinematics of a parallel-serial (hybrid) manipulator.
J. of Robotic Systems, 9(1):13-36, 1992.
- 160
-
Shelef G.
Six degree of freedom micromanipulator,
11 Avril 1989
United States Patent 4,819,496 Air Force Washington.
- 161
-
Shen H. et al.
Structure and analysis of a novel three-translation parallel
mechanism.
Mechanism and Machine Theory, 40(10):1181-1194,
Octobre 2005
- 162
-
Stewart D.
A platform with 6 degrees of freedom.
Proc. of the Institution of mechanical engineers, 180(Part 1,
15):371-386, 1965.
- 163
-
Stocco L. et Salcudean T.
A coarse-fine approach to force-reflecting hand controller design.
In IEEE Int. Conf. on Robotics and Automation, pages 404-410,
Minneapolis, 24-26 Avril 1996
- 164
-
Stoughton R. et Kokkinis T.
Some properties of a new kinematic structure for robot manipulators.
In ASME Design Automation Conf., pages 73-79, Boston,
28 Juin 1987
- 165
-
Tanev T.K.
Forward displacement analysis of a three legged
four-degree-of-freedom parallel manipulator.
In ARK, pages 147-154, Strobl,
29 Juin-4 Juillet, 1998
- 166
-
Tesar D. et Butler M.S.
A generalized modular architecture for robot structures.
Manufacturing review, 2(2), Juin 1989
- 167
-
Thornton G.S.
The GEC Tetrabot-a new serial-parallel assembly robot.
In IEEE Int. Conf. on Robotics and Automation, pages 437-439,
Philadelphia, 24-29 Avril 1988
- 168
-
Kaisha Toyoda Kokikabushiki, Pierrot F., et Company O.
Four degree of freedom parallel robot,
18 Septembre 2000
European Patent EP 1 084 802 A2.
- 169
-
Tsai L-W. et Joshi S.
Comparison study of architectures of four 3 degree-of-freedom
translational parallel manipulators.
In IEEE Int. Conf. on Robotics and Automation, pages
1283-1288, Seoul, 23-25 Mai 2001
- 170
-
Tsai L-W.
Kinematics of a three-dof platform with three extensible limbs.
In ARK, pages 401-410, Portoroz-Bernadin,
22-26 Juin 1996
- 171
-
Tsai L-W.
The jacobian analysis of a parallel manipulator using reciprocal
screws.
In ARK, pages 327-336, Strobl,
29 Juin-4 Juillet, 1998
- 172
-
Vischer P. et Clavel R.
Argos: a novel 3-dof parallel wrist mechanism.
Int. J. of Robotics Research, 19(1):5-11,
Janvier 2000
- 173
-
Wang J.S. et al.
Error analysis on a tripod parallel machine tool based on D-H
parameters differential transform.
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 174
-
Wang J. et Liu X-J.
Analysis of a novel cylindrical 3-dof parallel robot.
Robotics and Autonomous Systems, 42(1):31-46,
Janvier 2003
- 175
-
Wenger P. et Chablat D.
Kinematic analysis of a new parallel machine-tool: the Orthoglide.
In ARK, pages 305-314, Piran, 25-29 Juin 2000
- 176
-
Williams II R.L. et Poling D.B.
Spherically-actuated platform manipulator.
In ASME Proc. of the the 26th Biennial Mechanisms Conf.,
Baltimore, 10-13 Septembre 2000
- 177
-
Wu H. et al.
Design of parallel intersector weld/cut robot for machining processes
in ITER vacuum vessel.
Fusion Engineering and Design, 69(1-4):327-331,
Septembre 2003
- 178
-
Xi F., Xu Y., et Xiong G.
Design and analysis of a re-configurable parallel robot.
Mechanism and Machine Theory, 41(2):191-211,
Février 2006
- 179
-
Xu Q. et Li Y.
Design and analysis of a new three-prismatic-revolute-cylindrical
translational parallel manipulator.
Proc. Instn Mech Engrs, Part C: J. Mechanical Engineering
Science, 221(5):565-576, 2007.
- 180
-
Yi L. et Leinonen T.
Using cad variation geometric approach solving velocity/acceleration
of a 4SPS &UPU parallel manipulator.
In 12th IFToMM World Congress on the Theory of Machines and
Mechanisms, Besancon, 18-21 Juin 2007
- 181
-
Yi B-J., Cox D., et Tesar D.
Analysis and design criteria for a redundantly actuated 4-legged six
degree-of-freedom parallel manipulator.
In IEEE Int. Conf. on Robotics and Automation, pages
3286-3293, Seoul, 21-26 Mai 2001
- 182
-
Zabalza I. et al.
Tri-Scott. a new kinematic structure for a 6-dof decoupled parallel
manipulator.
In Workshop on Fundamental Issues and Future Research Directions
for Parallel Mechanisms and Manipulators, pages 12-15, Québec,
3-4 Octobre 2002
- 183
-
Zamanov V.B et Sotirov Z.M.
Parallel manipulators in robotics.
In IMACS/SICE Int. Symp. on Robotics, Mechatronics, and
Manufacturing Systems, pages 409-418, Kobe,
16-20 Septembre 1992
- 184
-
Zeng D., Huang Z., et Lu W.
Performance analysis and optimal design of a 3-dof 3-RUR parallel
mechanism.
ASME J. of Mechanical Design, 130(4):042307-1/9,
Avril 2008
- 185
-
Zhang D. et Gosselin C.M.
Kinetostatic modeling of N-DOF parallel mechanisms with a passive
constraining leg and prismatic actuators.
ASME J. of Mechanical Design, 123(3):375-384,
Septembre 2001
- 186
-
Zhang D. et Zhang F.
Design and analysis of a totally decoupled 3-dof spherical parallel
manipultator.
Robotica, 29(7):1093-1100, Décembre 2011
- 187
-
Zhang Y., Liu H., et Wu X.
Kinematics analysis of a novel parallel manipulator.
Mechanism and Machine Theory, 44(9):1648-1657,
Septembre 2009
- 188
-
Zhu S-J., Huang Z., et Zhao M-Y.
Singularity analysis for a 5-dof fully-symmetrical parallel
manipulator 5-
.
In IEEE Int. Conf. on Robotics and Automation, pages
1189-1194, Roma, 10-14 Avril 2007
- 189
-
Zlatanov D. et Gosselin C.M.
A family of new parallel architectures with four degrees of freedom.
In F.C. Park C.C. Iurascu, editor, Computational Kinematics,
pages 57-66. EJCK, 20-22 Mai 2001
- 190
-
Zlatanov D., Bonev I.A., et Gosselin C.M.
Constraint singularities as configuration space singularities.
In ARK, Caldes de Malavalla,
29 Juin-2 Juillet, 2002
- 191
-
Zobel P.B., Di Stefano P., et Raparelli T.
The design of a 3 dof parallel robot with pneumatic drives.
In 27th Int. Symp. on Industrial Robots (ISIR), pages 707-710,
Milan, 6-8 Octobre 1996
- 192
-
Zoppi M., Bruzzone L.E., et Molfino R.M.
A novel 5-dof interconnected-chains PKM for manufacturing revolute
surfaces.
In 4th Chemnitzer Parallelkinematik Seminar, Chemnitz,
20-21 Avril 2004
Next: About this document ...
Up: archi_robot
Previous: Treillis articulés/Truss
La page de J-P. Merlet
J-P. Merlet home page
La page Présentation de COPRIN
COPRIN home page
La page "Présentation" de l'INRIA
INRIA home page
Jean-Pierre Merlet